LINUX - Share Use the Internet to access Ponsel

Computer in the world, shared-use Internet access already is commonplace. One Internet connection with any type of connection can be used to another computer that is connected in one network.

PDA based on Windows Mobile Phone, also share the same Internet access easy. Simply set the appropriate settings on the PDA and PDA Andapun can join to feel that there is Internet access on the PC. This way, you can save the use of GPRS.
Other mobile phone case with Linux. Mobile phone is basically capable of doing the withdrawal of Windows-based PDA Phone. Can even be done via bluetooth. However, in this operating system, sharing the Internet a little more difficult than with Windows.
For more details, let's follow the steps given configuration of the phone Signal below. Just enough information, the steps below require an additional application called cNAT, cPPP and the modem driver that can be downloaded for free from the mailing list Signal Mania.
The first requirement you must meet is the network configuration settings or may not be the same as that between the network and the mobile computer. The establishment of a network connection driver Belcarra USB LAN installation phase with that given by the edition of Signal.

When these requirements have been met, the next step is to copy the program files are cNAT.mpkg and cPPP.mpkg to phone in and run the file that is installed on the mobile phone system. You can install this application on the phone memory or memory card category with free.

The next step is to install Bluetooth null modem. To install a modem, you must first establish the connection between the mobile phone with the PC. How, click Start> Control Panel> Bluetooth Devices. Next, select the Devices tab, click New, and give the check box in front of the check My device is ready and searchable.
Then, activate the option Discoverable the bluetooth feature on your phone and continue by clicking the Next button on the wizard. In the following wizard, the computer will try to find your mobile phone and will install the search results on the screen. Linux mobile phone you choose from the list peranti bluetooth, and then click Next.
In the next wizard, set the passkey that will be used to establish the connection between the phone and computer. Finally, click Finish to end the installation process bluetooth device.

Now, it's time to install the modem driver indeed. Click Start> Control Panel> Phone and Modem Options> Modem. Click the New button to display the modem installation wizard. Check the option Do not detect the modem and choose it by yourself, followed by clicking the Next button. Navigate search the driver file to the location you save the downloaded file cmamodem_XP.inf Signal Mania's mailing list.

Next you will see a new device called Friends Moto NULL modem XP-680i 115,200 bps. Choose the option and continue the installation by clicking the Next button. When the warning window appears on your driver version, with the option Continue to install. Continue the installation process until you have the option Finish to end the wizard.
Next, make a dial up connection to your virtual modem. How, select Network Connections in Control Panel. Click Create a new connection in the Network task, followed by clicking Next. Select the radio button Connect to the Internet> Next Set up my connection manually> Next> Next. In the ISP Name field, fill in "Internet over Bluetooth", followed by clicking Next. To the requested phone number, fill in the number 0, and then click Next> Next> Finish.

To configure the dial up connection you just created, right-click the icon Internet connection over Bluetooth, then select Properties. Select the name of your virtual modem in the Connect using, and press the Configure .... In the Modem Configuration window, provide a check mark in front of the option Show the terminal windows, and press OK.
To turn off the default gateway settings of your connection, to berpindahlah Networking tab. Give a check mark in front of the Client for Microsoft Networks. Select the check Internet Protocol (TCP / IP), press the Properties> Advanced. In the General tab, uncheck the option in front of the check Use default gateway on remote network. Continue Wins tab, and then gave the check in front of Enable NetBIOS over TCP / IP is terminated by clicking OK, OK and OK again to save all the changes that have been made.

In the next stage, we will merutekan packet data from mobile phone to the Internet through a local network. First, create a Loopback Adapter in Windows. How, click Start> Control Panel> Add new hardware> Next. Select the option Yes, I have connected the hardware and click Next. Gulunglah screen to the bottom position and then click Add a new hardware device proceed by clicking the Next button. Select the option Install the hardware which I have Candy from the list (Advanced Options) and click Next. Select the Network adapter, click Next again, select Microsoft as a hardware vendor, and select Microsoft Loopback Adapter in the list of hardware. Click Next> Next> Finish to complete the installation process you.
The next step is to enable network sharing features on your LAN connection. Do, open the Network Connection in Control panel, right-click your network connection and select Properties. On the General tab, select Internet Protocol (TCP / IP) and select Properties. Write your original settings following IP subnet to its sehelai in the paper for the next step. After that, enter the IP address 192.168.1.1 and subnet 255.255.255.0 as the subnet to its end by clicking OK. Click the Advanced tab, then check the options in front of the Allow other network users to make connection to the internet through this computer and click OK.
Loopback adapter is now clear that you have created in the previous two steps. Elimination step can be done by clicking Start> Control panel> System> Hardware> Device Manager, then select the Network Interface Card \ Microsoft Loopback Adapter

then press the Delete key and click OK.
If the Loopback Adapter has been deleted, return your original IP address in the Network Connection. Still do the same as the previous two steps, only this time you enter the IP address that you have recorded previously.
When all the steps that you have made, it means that your work is almost complete. Now try to make a connection to the phone by clicking on the icons over Bluetooth Internet connection you have made. Make sure bluetooth modem on your phone is active, then click the Dial button. When the confirmation appears in the phone, press OK and wait until the pop-up terminal window appears. Click the PPP on the phone icon and click Continue on the terminal window pop up that appears. Continue by clicking the icon on the phone ShareInt.
You currently have the connection speed is 115.2 kbps. This is shown in the connection information in the notification area is located on the right bottom of the screen. Next, create a false profile GPRS connection on mobile phones. How, percussion setup menu and then select the Data Network. Create a new profile called Fake. Fill APN settings with the number 0 and press Save to save the connection profile.
Now, you can enjoy Internet access that comes from the local network using the GPRS profile named Fake false. To use this profile in the virtual browser, navigate to your browser settings Fake profile you just created. Finally, happy surfing with the local network with mobile Linux.


Information
NAT Applications
Filename: cNAT.mpkg (Internet Share)
File Size: 407 KB
Download site: http://groups.yahoo.com/group/sinyalmania
Type: Freeware
Developer: Chris Ma
Operating system: Linux

PPP Applications
Filename: cPPP.mpkg (PPP)
File Size: 48 KB
Download site: http://groups.yahoo.com/group/sinyalmania
Type: Freeware
Developer: Chris Ma
Operating system: Linux

Modem Driver
Filename: cmamodem_XP.inf (NULL Modem MotoFriends XP-680i)
File size: 4 KB
Download site: http://groups.yahoo.com/group/sinyalmania
Type: Freeware
Developer: Chris Ma
Operating system: Linux

(Steven Andy Pascal)